Which MSHA Training Course Do You Need?
Whether you're new to mining, returning to the industry after time away, or enrolling an entire crew, choosing the right Mine Safety and Health Administration (MSHA) training course is the first step toward meeting your training requirements.
Taking the wrong course can leave you without the training needed to work at a mine site. The right course depends on where you'll be working, your mining experience, and whether you're entering the industry for the first time or completing your annual refresher training.
This guide explains the differences between MSHA Part 46, Part 48 Subpart A, and Part 48 Subpart B, helping you determine which training course is right for you or your team.
Understanding MSHA Training Requirements
Choosing the correct MSHA training course comes down to two essential questions:
- Where will you be working? The type of mine determines whether you need Part 46, Part 48 Subpart A, or Part 48 Subpart B training.
- Are you a new or experienced miner? Your mining experience and previous training determine whether you need New Miner Training or Annual Refresher Training.
Once you know the answers, you can identify the training program that best fits your situation.
1. MSHA Part 46 Training: Surface Non-Metal Mines
MSHA Part 46 applies to qualifying surface non-metal mining operations, including sand, gravel, surface stone, surface clay, surface limestone, cement, lime, colloidal phosphate, marble, granite, sandstone, slate, shale, traprock, kaolin, feldspar, and shell dredging operations.
If you work at a covered operation as a miner, contractor, supervisor, or mine operator, you may need Part 46 training based on your duties and applicable requirements.
Part 46 New Miner Training: 24 Hours
New miners must complete at least 24 hours of Part 46 New Miner Training. At least four hours must be completed before beginning work at the mine. The remaining training may be completed while working under the supervision of an experienced miner, as permitted by the applicable requirements.
First aid training must be completed within 60 days, and all required New Miner Training must be completed within 90 days.
Part 46 Annual Refresher Training: 8 Hours
Experienced miners must complete at least eight hours of Annual Refresher Training every 12 months to maintain their training and stay informed about mine safety practices.
Who Can Provide Part 46 Training?
Part 46 training may be provided by a competent person designated by the mine operator or independent contractor. This individual must have the ability, training, knowledge, or experience necessary to provide instruction in the relevant subject area.
2. MSHA Part 48 Subpart B Training: Surface Mines
Part 48 Subpart B generally applies to surface mining operations that are not covered by Part 46. These include surface metal mines, surface coal mines, and surface areas of underground mines.
Contractors and miners working at these operations must complete the training applicable to their work and experience.
Part 48 Subpart B New Miner Training: 24 Hours
New miners generally need 24 hours of New Miner Training under the applicable Part 48 requirements. At least eight hours must be completed before starting work at the mine.
This training introduces miners to essential safety practices, workplace hazards, emergency procedures, and other subjects relevant to their mining environment.
Part 48 Subpart B Annual Refresher Training: 8 Hours
Experienced miners must complete at least eight hours of Annual Refresher Training every 12 months.
Refresher training helps miners remain aware of workplace hazards, changes in safety procedures, and practices that support a safer working environment.
Who Can Provide Part 48 Subpart B Training?
Part 48 training must be provided by an MSHA-approved instructor. These instructors are commonly known as Blue Card instructors because of their approved training credentials.
Before enrolling, confirm that your training provider and course meet the applicable MSHA requirements.
3. MSHA Part 48 Subpart A Training: Underground Mines
MSHA Part 48 Subpart A covers underground coal, metal, and non-metal mining operations.
Underground mines present additional hazards that require specialized training. Topics may include self-rescue and respiratory protection devices, escapeways, emergency evacuation, roof or ground control, and ventilation.
Miners working underground need training that prepares them to recognize hazards and respond appropriately to emergencies.
Part 48 Subpart A New Miner Training: 40 Hours
New miners entering covered underground operations generally need 40 hours of New Miner Training.
The Part 48 Subpart A New Miner Training program offered by MSHA Safety Services includes:
- 32 hours of online training: Delivered through a digital classroom with an experienced MSHA Blue Card instructor.
- 8 hours of on-site hazard training: Conducted by the mine operator at the mine site.
This combination provides foundational mining safety instruction while allowing miners to receive site-specific hazard training before performing applicable work.
Part 48 Subpart A Annual Refresher Training: 8 Hours
Experienced underground miners must complete at least eight hours of Annual Refresher Training every 12 months.
This training reinforces underground safety practices and helps miners remain familiar with hazards, emergency procedures, and applicable safety requirements.
4. Are You a New or Experienced Miner?
Your experience and training history help determine which MSHA course you need.
New Miner Training
You generally fall into the new miner category if you're entering mining for the first time or have not completed the required New Miner Training.
The applicable training program depends on your mine type:
- Part 46 New Miner Training for qualifying surface non-metal mines.
- Part 48 Subpart B New Miner Training for covered surface mines.
- Part 48 Subpart A New Miner Training for covered underground mines.
Experienced Miner Training
You generally qualify as an experienced miner if you've completed the required New Miner Training and have at least 12 months of mining experience.
Experienced miners typically need Annual Refresher Training every 12 months. However, returning miners and individuals with unusual training histories may have additional requirements.
If you're unsure which category applies to you, review your training records and confirm your eligibility with your mine operator or training provider before enrolling.
5. Special Situations That May Affect Your MSHA Training
Not every mining career follows the same path. Contractors, returning miners, and workers moving between surface and underground operations may need to consider additional requirements.
Contractors Working at Both Part 46 and Part 48 Surface Mines
Independent contractors who work at both Part 46 and Part 48 surface operations may be able to use Part 48 training to meet applicable training requirements for both types of operations.
This can simplify training administration by allowing a contractor to use one training plan and maintain one set of records, where permitted.
However, Part 46 training alone does not satisfy Part 48 training requirements. Contractors should confirm their training plan with the relevant mine operators and ensure that all applicable requirements are met.
Returning to Mining After Time Away
If you've been away from mining, your required training may depend on your previous mining experience, when you completed New Miner Training, and the time since you last worked in the industry.
If you have less than 12 months of mining experience:
- If you completed New Miner Training within the previous 36 months, you may not need to repeat it.
- If more than three years have passed since you completed New Miner Training, you may need to complete it again.
If you have 12 months or more of mining experience:
- You generally won't need to repeat New Miner Training solely because you've been away.
- You may need experienced miner training before returning to work.
- If you've been away from mining for five years or more, the applicable experienced miner training must be at least eight hours under the requirements described in this guide.
Because returning-miner requirements depend on your circumstances and the applicable MSHA rules, confirm your status before selecting a course.
Working at Both Surface and Underground Mines
If your job requires you to work at both surface and underground mines, you may need training that covers both environments.
MSHA Safety Services offers Part 48 Subpart A New Miner Training that combines 32 hours of online instruction with eight hours of on-site hazard training conducted by the mine operator. This program is designed to cover the applicable new miner training for underground Subpart A and surface Subpart B operations, helping eligible miners avoid taking separate new miner courses.
Confirm that the program meets the requirements for your specific work assignments before enrolling.
MSHA Training in English and Spanish
Language should not be a barrier to learning important mine safety practices.
MSHA Safety Services offers training courses in both English and Spanish, allowing individuals and crews to complete their training in the language they're most comfortable using.
When enrolling a team, consider language preferences and ensure that workers understand the safety concepts covered in their training.
6. What Else Might Your Mine Site Require?
Completing your MSHA training course is an important step, but it may not be the only training required before you begin work.
Site-Specific Hazard Awareness Training
When you arrive at a new mine, you may need site-specific hazard awareness training. This instruction introduces you to hazards associated with the mine, its operating procedures, and the areas where you'll be working.
Task Training
Task training may also be required when you're assigned new work, operate unfamiliar equipment, or take on a task that requires additional instruction.
These training activities are generally completed at the mine site and are coordinated by the mine operator or another responsible party.
Before starting work, confirm that you've completed all applicable training for your assigned location and duties.
7. MSHA Training Course Comparison: Quick Reference
Use the following table to compare the main MSHA training programs.
| Mine Type | New Miner Training | Annual Refresher Training |
|---|---|---|
| Surface non-metal mines | Part 46 — 24 hours | Part 46 — 8 hours |
| Other covered surface mines | Part 48 Subpart B — 24 hours | Part 48 Subpart B — 8 hours |
| Underground mines | Part 48 Subpart A — 40 hours, including 32 hours online and 8 hours of on-site hazard training | Part 48 Subpart A — 8 hours |
Important: These are general training categories and hour requirements. Your specific requirements may depend on your mining operation, work duties, training history, and applicable MSHA regulations. Verify the correct course before enrolling.
8. How to Choose the Right MSHA Training Course
If you're still unsure which course to take, follow these steps:
Step 1: Identify your mine type. Determine whether you'll work at a qualifying surface non-metal mine, another covered surface mine, or an underground mine.
Step 2: Review your training history. Determine whether you've completed New Miner Training and whether you meet the applicable experienced miner criteria.
Step 3: Check your work requirements. Ask your mine operator or employer whether additional site-specific or task training is required.
Step 4: Select the appropriate course. Choose the course that matches your mine type and training status.
Step 5: Confirm your enrollment details. Make sure the training provider, course format, instructor qualifications, and completion requirements are appropriate for your situation.
Taking these steps before enrolling can help prevent delays and ensure you receive the training you need.
Find the Right MSHA Training Course for You or Your Crew
Choosing the correct MSHA training course doesn't have to be complicated. Once you identify your mine type and experience level, you can narrow down your options and determine the training that applies to your work.
MSHA Safety Services offers Part 46, Part 48 Subpart A, and Part 48 Subpart B training options, including New Miner Training and Annual Refresher Training. Courses are available in English and Spanish to support individual miners, contractors, and teams.
Ready to get started? Explore the available MSHA training courses and enroll in the program that fits your needs. If you're registering a crew, working across multiple mine types, or returning to mining after time away, contact MSHA Safety Services for help identifying the appropriate course.
Train for your work environment. Understand your requirements. Put mine safety first.
